TSC · 2.25 × 1.25 in
How to print FNSKU labels on a TSC DA210 (2.25 × 1.25 in)
Set the paper size to 2.25 × 1.25 in (57 × 32 mm) in the TSC DA210 driver, print at Scale 100% with margins set to None, and print a page that is exactly one 2.25 × 1.25 in label. Stickready turns Amazon’s label PDF into that page in your browser, with the barcode rebuilt for the printer’s dots, opens the print dialog at that size, and remembers your printer’s offset after one test label.
The settings
| Setting | TSC DA210, 2.25 × 1.25 in |
|---|---|
| Paper size | 2.25 × 1.25 in (57 × 32 mm) |
| Scale | 100% (Actual size). Never “Fit to page”. |
| Margins | None |
| Orientation | Landscape |
| Headers and footers | Off |
| Media type | Labels with gaps (web / gap sensing) |
| Print resolution | 203 dpi, direct thermal |
The DA210 and TE210 handle 2.25 × 1.25 in rolls well. Create the Stock in the Seagull driver and pick it in the print dialog; Stickready’s PDF page already matches it exactly.
Set up the TSC DA210 once
- Add the paper size. Seagull TSC driver: Printing Preferences → Page Setup → Stock → New, enter the size; Media Type “Labels with gaps”.
- Teach it the label. Hold Feed while switching on and let go after the light blinks to run the gap calibration.
- Make the labels. Drop Seller Central’s label PDF into Stickready (any layout, including the 30-up sheet), pick TSC DA210 and 2.25 × 1.25 in, and press Print. The print dialog opens at exactly that page size, at 100%; Download PDF is there too.
- Print one test label and scan it with your phone. If it’s off by a millimeter, measure the two gaps on Stickready’s test label once and it’s fixed for good.
When it goes wrong
The sides are cut off
The page is bigger than the label. Seller Central’s PDF is a Letter page (or a 2.625 in sheet label), and the printer crops whatever doesn’t fit. Use Stickready’s Print button so the page is exactly one 2.25 × 1.25 in label, print at Scale 100%, and keep the bars inside a 2 mm margin.
Two labels per sticker, or the label is tiny
The print dialog is shrinking a big page to fit, usually “Fit to page” or “Scale to fit”. Set Scale to 100% (Actual size) and choose 2.25 × 1.25 in as the paper size, not Letter.
A blank label between every label
The printer thinks the labels are longer than they are: the scale, the margins or the driver’s paper size don’t match. Hold Feed while switching on and let go after the light blinks to run the gap calibration. Also check that the paper size in the driver is 2.25 × 1.25 in (57 × 32 mm), not 4 × 6 in, with Margins None.
Everything is shifted a millimeter or two
Every printer feeds a little differently. Print Stickready’s test label (a frame 2 mm inside each edge), measure the left and top gaps, and Stickready moves all future labels by the difference. Saved for this printer.
The barcode won’t scan
Thin bars smeared by heat, or bars squeezed by scaling. Stickready draws every bar as whole printer dots (203 dpi), so check that Scale is 100%, lower the darkness one step if bars look fat, and scan the test label with a phone before the full run.
More symptoms, printer by printer: print troubleshooting.
Questions
What paper size do I pick for 2.25 × 1.25 in labels on a TSC DA210?
2.25 × 1.25 in (57 × 32 mm). Choose it in the print dialog (or add it in the printer driver first), with Scale 100% and margins None.
Is 2.25 × 1.25 in big enough for Amazon FNSKU labels?
Yes. Amazon accepts item labels from 1 × 2 in up to 2 × 3 in, and 2.25 × 1.25 in (57 × 32 mm) is inside that range.
Do I need special software for the TSC DA210?
Only its normal driver. Stickready runs in the browser: its Print button opens your system print dialog at the right page size, and you can also download the PDF and print it from any PDF viewer.
Updated November 9, 2026