Phomemo · 50 × 30 mm
How to print FNSKU labels on a Phomemo (50 × 30 mm)
Set the paper size to 1.969 × 1.181 in (50 × 30 mm) in the Phomemo driver, print at Scale 100% with margins set to None, and print a page that is exactly one 50 × 30 mm label. Stickready turns Amazon’s label PDF into that page in your browser, with the barcode rebuilt for the printer’s dots, opens the print dialog at that size, and remembers your printer’s offset after one test label.
The settings
| Setting | Phomemo, 50 × 30 mm |
|---|---|
| Paper size | 1.969 × 1.181 in (50 × 30 mm) |
| Scale | 100% (Actual size). Never “Fit to page”. |
| Margins | None |
| Orientation | Landscape |
| Headers and footers | Off |
| Media type | Labels with gaps (web / gap sensing) |
| Print resolution | 203 dpi, direct thermal |
50 × 30 mm rolls are common in the UK and EU. At 50 mm (1.97 in) they meet Amazon’s 1 × 2 in minimum; the barcode fits with 2-dot bars and a short title line.
Set up the Phomemo once
- Add the paper size. Install the Phomemo desktop driver, then add the label size as a custom paper size.
- Teach it the label. Double-press the feed button to learn the gap after changing rolls.
- Make the labels. Drop Seller Central’s label PDF into Stickready (any layout, including the 30-up sheet), pick Phomemo and 50 × 30 mm, and press Print. The print dialog opens at exactly that page size, at 100%; Download PDF is there too.
- Print one test label and scan it with your phone. If it’s off by a millimeter, measure the two gaps on Stickready’s test label once and it’s fixed for good.
When it goes wrong
The sides are cut off
The page is bigger than the label. Seller Central’s PDF is a Letter page (or a 2.625 in sheet label), and the printer crops whatever doesn’t fit. Use Stickready’s Print button so the page is exactly one 50 × 30 mm label, print at Scale 100%, and keep the bars inside a 2 mm margin.
Two labels per sticker, or the label is tiny
The print dialog is shrinking a big page to fit, usually “Fit to page” or “Scale to fit”. Set Scale to 100% (Actual size) and choose 50 × 30 mm as the paper size, not Letter.
A blank label between every label
The printer thinks the labels are longer than they are: the scale, the margins or the driver’s paper size don’t match. Double-press the feed button to learn the gap after changing rolls. Also check that the paper size in the driver is 1.969 × 1.181 in (50 × 30 mm), not 4 × 6 in, with Margins None.
Everything is shifted a millimeter or two
Every printer feeds a little differently. Print Stickready’s test label (a frame 2 mm inside each edge), measure the left and top gaps, and Stickready moves all future labels by the difference. Saved for this printer.
The barcode won’t scan
Thin bars smeared by heat, or bars squeezed by scaling. Stickready draws every bar as whole printer dots (203 dpi), so check that Scale is 100%, lower the darkness one step if bars look fat, and scan the test label with a phone before the full run.
More symptoms, printer by printer: print troubleshooting.
Questions
What paper size do I pick for 50 × 30 mm labels on a Phomemo?
1.969 × 1.181 in (50 × 30 mm). Choose it in the print dialog (or add it in the printer driver first), with Scale 100% and margins None.
Is 50 × 30 mm big enough for Amazon FNSKU labels?
Yes. Amazon accepts item labels from 1 × 2 in up to 2 × 3 in, and 50 × 30 mm (50 × 30 mm) is inside that range.
Do I need special software for the Phomemo?
Only its normal driver. Stickready runs in the browser: its Print button opens your system print dialog at the right page size, and you can also download the PDF and print it from any PDF viewer.
Updated November 9, 2026