Dymo 4XL · Dymo 30334
How to print FNSKU labels on a Dymo LabelWriter 4XL (Dymo 30334)
Set the paper size to 2.25 × 1.25 in (57 × 32 mm) in the Dymo LabelWriter 4XL driver, print at Scale 100% with margins set to None, and print a page that is exactly one Dymo 30334 label. Stickready turns Amazon’s label PDF into that page in your browser, with the barcode rebuilt for the printer’s dots, opens the print dialog at that size, and remembers your printer’s offset after one test label.
The settings
| Setting | Dymo LabelWriter 4XL, Dymo 30334 |
|---|---|
| Paper size | 2.25 × 1.25 in (57 × 32 mm) · in the driver: “30334” |
| Scale | 100% (Actual size). Never “Fit to page”. |
| Margins | None |
| Orientation | Landscape |
| Headers and footers | Off |
| Media type | Set by the Dymo paper name |
| Print resolution | 300 dpi, direct thermal |
Dymo 30334 labels are 2-1/4 × 1-1/4 in (57 × 32 mm). The 4XL finds each label by its notches, so there is no calibration step; the one thing to get right is choosing the 30334 paper in the print dialog instead of Letter.
Set up the Dymo LabelWriter 4XL once
- Add the paper size. Pick the Dymo paper name in the print dialog (for example “30334 Multi-Purpose”), not Letter.
- Teach it the label. No calibration step: Dymo finds the label by its notches.
- Make the labels. Drop Seller Central’s label PDF into Stickready (any layout, including the 30-up sheet), pick Dymo LabelWriter 4XL and Dymo 30334, and press Print. The print dialog opens at exactly that page size, at 100%; Download PDF is there too.
- Print one test label and scan it with your phone. If it’s off by a millimeter, measure the two gaps on Stickready’s test label once and it’s fixed for good.
When it goes wrong
Tiny label in one corner, or printed sideways
The print dialog is using Letter, or the Dymo driver expects the label turned. Pick “30334” as the paper. If it still prints sideways, turn on “Turn 90°” in your Stickready printer profile and download again.
The sides are cut off
The page is bigger than the label. Seller Central’s PDF is a Letter page (or a 2.625 in sheet label), and the printer crops whatever doesn’t fit. Use Stickready’s Print button so the page is exactly one Dymo 30334 label, print at Scale 100%, and keep the bars inside a 2 mm margin.
Two labels per sticker, or the label is tiny
The print dialog is shrinking a big page to fit, usually “Fit to page” or “Scale to fit”. Set Scale to 100% (Actual size) and choose “30334” as the paper size, not Letter.
A blank label between every label
The printer thinks the labels are longer than they are: the scale, the margins or the driver’s paper size don’t match. Also check that the paper size in the driver is “30334”, not 4 × 6 in, with Margins None.
Everything is shifted a millimeter or two
Every printer feeds a little differently. Print Stickready’s test label (a frame 2 mm inside each edge), measure the left and top gaps, and Stickready moves all future labels by the difference. Saved for this printer.
The barcode won’t scan
Thin bars smeared by heat, or bars squeezed by scaling. Stickready draws every bar as whole printer dots (300 dpi), so check that Scale is 100%, lower the darkness one step if bars look fat, and scan the test label with a phone before the full run.
More symptoms, printer by printer: print troubleshooting.
Questions
What paper size do I pick for Dymo 30334 labels on a Dymo LabelWriter 4XL?
2.25 × 1.25 in (57 × 32 mm), called “30334” in the driver. Choose it in the print dialog, with Scale 100% and margins None.
Is Dymo 30334 big enough for Amazon FNSKU labels?
Yes. Amazon accepts item labels from 1 × 2 in up to 2 × 3 in, and Dymo 30334 (57 × 32 mm) is inside that range.
Do I need special software for the Dymo LabelWriter 4XL?
Only its normal driver. Stickready runs in the browser: its Print button opens your system print dialog at the right page size, and you can also download the PDF and print it from any PDF viewer.
Updated November 9, 2026