Laser or inkjet · A4 · 27 up
How to print FNSKU labels on A4 27-up sheets
Print on A4 (210 × 297 mm) paper at Scale 100% (Actual size), never “Fit to page”, from a PDF whose page is the whole sheet with every label in its cell. Stickready turns Amazon’s label PDF, in any layout, into that file in your browser, starts at any label on a half-used sheet, and saves your printer’s offset after one test sheet.
The settings
| Setting | Laser or inkjet, A4 · 27 up |
|---|---|
| Paper size | A4 (210 × 297 mm) |
| Scale | 100% (Actual size). Never “Fit to page”. |
| Margins | Default or None |
| Orientation | Portrait |
| Headers and footers | Off |
| Media type | Labels or heavy paper |
| Print resolution | 600 dpi |
A4 27-up is 3 columns × 9 rows of 63.5 × 29.6 mm labels, one of the A4 layouts Seller Central offers on the UK and EU stores. Stickready reads Amazon’s 27-up PDF and also prints onto 27-up sheets from any other layout, a thermal PDF or a spreadsheet. On a half-used sheet it remembers the next free label.
Set up the printer once
- Pick the paper. Choose the paper the sheet is (Letter or A4). Feed one sheet at a time through the tray your printer uses for labels.
- Check the alignment. Print the test sheet on plain paper first and hold it against a label sheet up to a window.
- Make the labels. Drop Seller Central’s label PDF into Stickready (any layout, including the 30-up sheet), pick Laser or inkjet and A4 · 27 up, and press Print. The print dialog opens at A4 paper, at 100%; Download PDF is there too.
- Print one test sheet on plain paper and scan it with your phone. If it’s off by a millimeter, measure the two gaps on Stickready’s test sheet once and it’s fixed for good.
When it goes wrong
Each row drifts a little further off
The print dialog is scaling the page. Set Scale to 100% (Actual size), not “Fit”, and pick A4 paper; an A4 page printed on Letter (or the other way round) shrinks the whole grid.
The whole grid is shifted a millimeter or two
Print the test sheet on plain paper, hold it against a label sheet up to a window, and measure the left and top gaps. Enter them in Stickready’s calibration once; they’re saved for this printer.
Labels print on the wrong stickers of a used sheet
Tap the first empty sticker in Stickready’s sheet preview so the job starts there. Stickready remembers where the last job stopped and suggests the next free label.
The barcode won’t scan
Cheap or low toner smudges thin bars, and draft mode prints them faint. Print at normal or best quality, Scale 100%, and scan one label with your phone before the full run.
More symptoms, printer by printer: print troubleshooting.
Questions
What paper size do I pick for A4 · 27 up labels on a laser or inkjet printer?
A4 (210 × 297 mm). Choose it in the print dialog, with Scale 100% and margins Default or None.
Is A4 · 27 up big enough for Amazon FNSKU labels?
Yes. Amazon accepts item labels from 1 × 2 in up to 2 × 3 in, and A4 · 27 up (63.5 × 29.6 mm) is inside that range.
Do I need special software for the printer?
Only its normal driver. Stickready runs in the browser: its Print button opens your system print dialog at the right page size, and you can also download the PDF and print it from any PDF viewer.
Updated November 9, 2026